The hybrid plasmon polariton (HPP) nanoscale waveguide consists of a semiconductor strip separated from a metallic surface by a low dielectric gap. Schematic shows HPP waveguide responding when a metal slit at the guide’s input end is illuminated. (courtesy of Zhang group)
The creation of a new quasiparticle called the “hybrid plasmon polariton” may throw open the doors to integrated photonic circuits and optical computing for the 21st century. Researchers with the U.S. Department of Energy (DOE)’s Lawrence Berkeley National Laboratory (Berkeley Lab) have demonstrated the first true nanoscale waveguides for next generation on-chip optical communication systems.
“We have directly demonstrated the nanoscale waveguiding of light at visible and near infrared frequencies in a metal-insulator-semiconductor device featuring low loss and broadband operation,” says Xiang Zhang, the leader of this research. “The novel mode design of our nanoscale waveguide holds great potential for nanoscale photonic applications, such as intra-chip optical communication, signal modulation, nanoscale lasers and bio-medical sensing.”
Zhang, a principal investigator with Berkeley Lab’s Materials Sciences Division and director of the University of California at Berkeley’s Nano-scale Science and Engineering Center (SINAM), is the corresponding author of a paper published by Nature Communications that describes this work titled “Experimental Demonstration of Low-Loss Optical Waveguiding at Deep Sub-wavelength Scales.” Co-authoring the paper with Zhang were Volker Sorger, Ziliang Ye, Rupert Oulton, Yuan Wang, Guy Bartal and Xiaobo Yin.
In this paper, Zhang and his co-authors describe the use of the hybrid plasmon polariton, a quasi-particle they conceptualized and created, in a nanoscale waveguide system that is capable of shepherding light waves along a metal-dielectric nanostructure interface over sufficient distances for the routing of optical communication signals in photonic devices. The key is the insertion of a thin low-dielectric layer between the metal and a semiconductor strip.
“We reveal mode sizes down to 50-by-60 square nanometers using Near-field scanning optical microscopy (NSOM) at optical wavelengths,” says Volker Sorger a graduate student in Zhang’s research group and one of the two lead authors on the Nature Communications paper. “The propagation lengths were 10 times the vacuum wavelength of visible light and 20 times that of near infrared.”
From left, Berkeley Lab’s Xiang Zhang, Ziliang Ye and Volker Sorger have demonstrated the first true nanoscale waveguides for next generation on-chip optical communication systems. (Photo by Roy Kaltschmidt, Berkeley Lab Public Affairs)
The high-technology world is eagerly anticipating the replacement of today’s electronic circuits in microprocessors and other devices with circuits based on the transmission of light and other forms of electromagnetic waves. Photonic technology, or “photonics,” promises to be superfast and ultrasensitive in comparison to electronic technology.
“To meet the ever-growing demand for higher data bandwidth and lower power consumption, we need to reduce the energy required to create, transmit and detect each bit of information,” says Sorger. “This requires reducing physical photonic component sizes down beyond the diffraction limit of light while still providing integrated functionality.”
Until recently, the size and performance of photonic devices was constrained by the interference that arises between closely spaced light waves. This diffraction limit results in weak photonic-electronic interactions that can only be avoided through the use of devices much larger in size than today’s electronic circuits. A breakthrough came with the discovery that it is possible to couple photons with electrons by squeezing light waves through the interface between a metal/dielectric nanostructure whose dimensions are smaller than half the wavelengths of the incident photons in free space.
Directing waves of light across the surface of a metal nanostructure generates electronic surface waves – called plasmons – that roll through the metal’s conduction electrons (those loosely attached to molecules and atoms). The resulting interaction between plasmons and photons creates a quasi-particle called a surface plasmon polariton(SPP) that can serve as a carrier of information. Hopes were high for SPPs in nanoscale photonic devices because their wavelengths can be scaled down below the diffraction limit, but problems arose because any light signal loses strength as it passes through the metal portion of a metal-dielectric interface.
“Until now, the direct experimental demonstration of low-loss propagation of deep sub-wavelength optical modes was not realized due to the huge propagation loss in the optical mode that resulted from the electromagnetic field being pushed into the metal,” Zhang says. “With this trade-off between optical confinement and metallic losses, the use of plasmonics for integrated photonics, in particular for optical interconnects, has remained uncertain.”
To solve the problem of optical signal loss, Zhang and his group proposed the hybrid plasmon polariton (HPP) concept. A semiconductor (high-dielectric) strip is placed on a metal interface, just barely separated by a thin oxide (low-dielectric) layer. This new metal-oxide-semiconductor design results in a redistribution of an incoming light wave’s energy. Instead of being concentrated in the metal, where optical losses are high, some of the light wave’s energy is squeezed into the low dielectric gap where optical losses are substantially less compared to the plasmonic metal.
3-D image overlap of the deep sub-wavelength HPP mode signal (red spot) that indicates the waveguide's potential to create strong light-matter-interaction for compact and highly functional photonic components. (courtesy of Zhang group)
“With this design, we create an HPP mode, a hybrid of the photonic and plasmonic modes that takes the best from both systems and gives us high confinement with low signal loss,” says Ziliang Ye, the other lead authors of the Nature Communications paper who is also a graduate student in Zhang’s research group. “The HPP mode is not only advantageous for down-scaling physical device sizes, but also for delivering novel physical effects at the device level that pave the way for nanolasers, as well as for quantum photonics and single-photon all-optical switches.”
The HPP waveguide system is fully compatible with current semiconductor/CMOS processing techniques, as well as with the Silicon-on-Insulator (SOI) platform used today for photonic integration. This should make it easier to incorporate the technology into low-cost, large-scale integration and manufacturing schemes. Sorger believes that prototypes based on this technology could be ready within the next two years and the first actual products could be on the market within five years.
“We are already working on demonstrating an all-optical transistor and electro-optical modulator based on the HPP waveguide system,” Sorger says. “We’re also now looking into bio-medical applications, such as using the HPP waveguide to make a molecular sensor.”
This research was supported by the National Science Foundation’s Nano-Scale Science and Engineering Center.
Lawrence Berkeley National Laboratory addresses the world’s most urgent scientific challenges by advancing sustainable energy, protecting human health, creating new materials, and revealing the origin and fate of the universe. Founded in 1931, Berkeley Lab’s scientific expertise has been recognized with 12 Nobel prizes. The University of California manages Berkeley Lab for the U.S. Department of Energy’s Office of Science. For more, visit www.lbl.gov.
Additional information:
For more information about the research of Xiang Zhang visit http://xlab.me.berkeley.edu/